- For 27/32" (21.52 mm) Laminated Tempered Glass (10 x 1.52 x 10 mm)
- CRL Glass Railing Systems Meet NBC Load Requirements When Installed in Accordance to ICC-3842
- Shoe is Drilled and Counter Bored 11-13/16" Center-to-Center in Pattern "D" 118-1/8" Length
Easy to order frameless glass railing system kit includes (1) 9BL21D Base Shoe, (10) XL21LT Adjustable Tapers and (2) lengths of LBSCBS10 cladding for both sides of the base shoe.
Notes: The TAPER-LOC® XAL Setting Base spaces the glass away from the Base Shoe's vertical walls at the bottom edge, allowing for glass angle adjustment. It also serves to insulate the glass panels from damage during insertion into the Base Shoe and, at the same time, center the glass in the pocket.
PANEL WIDTH and SUGGESTED TAPER-LOC® XAL SETS PER PANEL 1 Set for 6" to 14" (152 to 356 mm)
2 Sets for 14" to 28" (356 to 711 mm)
3 Sets for 28" to 42" (711 to 1067 mm)
4 Sets for 42" to 56" (1067 to 1422 mm)
5 Sets for 56" to 70" (1422 to 1778 mm)
6 Sets for 70" to 84" (1778 to 2134 mm)
Product Warning:All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate, it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate.
Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.